Titespot - Angle Heads

How To Order

A CAT50, Size 2 Milling head, Standard Length, Thru Spindle Coolant Delivery with an ER-11 Spindle is part No. CAT50-2M-ST-T-11

Please note: To order Angle Heads with special shanks, external coolant delivery, a 5-2-1 gearbox or In-Line Heads please call 01795 716449.

Head Size	Spindle	L	E	F	G	MBS	MSD	MTC
0	Weldon	50.8	6.35	10.312	15.367	15.875	3.175	0.381
1D 1 Drilling	Taperlock	76.2	12.7	11.8	20.7	25.4	2.9	3.2
	Eltool	76.2	12.7	17.5	25.0	28.6	3.3	2.4
	Weldon	76.2	12.7	12.7	20.7	25.4	3.3	3.2
1M 1 Milling	Taperlock	76.2	9.5	15.9	23.8	28.6	2.9	3.2
	Eltool	76.2	9.5	19.0	25.0	28.6	3.3	3.2
	ER-8	76.2	9.5	25.4	33.3	36.5	5.0	3.2
	Weldon	76.2	9.5	18.5	26.5	33.3	6.0	4.8
2D 2 Drilling	Eltool	101.6	15.9	18.3	28.6	41.3	4.0	7.1
	ER-11	101.6	15.9	31.8	41.9	47.6	7.0	3.6
	Weldon	101.6	15.9	23.0	33.3	38.1	8.0	3.2
2M 2 Milling	Eltool	101.6	15.9	24.8	34.9	44.5	4.0	7.1
	ER-11	101.6	15.9	39.0	49.2	57.2	7.0	3.6
	Weldon	101.6	15.9	27.9	38.1	47.6	9.5	3.2
2TD Hi Torque Drilling	Eltool	101.6	15.9	19.05	27.78	36.52	4.77	4.77
	ER-11	101.6	15.9	30.48	39.67	44.45	7.00	3.18
	Weldon	101.6	15.9	21.75	31.00	36.52	10.00	2.40
2TM Hi Torque Milling	Eltool	101.6	13.5	23.80	32.38	38.10	4.77	1.25
	ER-11	101.6	13.5	37.30	46.00	49.23	7.00	1.25
	Weldon	101.6	13.5	28.00	36.70	41.27	10.00	1.60
3D 3 Drilling	ER-11	127.0	17.5	40.5	34.4	73.0	7.0	9.9
3M 3 Milling	ER-16	127.0	17.5	46.0	66.7	76.2	10.0	6.4
3M 3 Milling	Weldon	127.0	17.5	34.4	55.6	66.7	12.0	6.4

MBS Minimum Bore Size • MSD Maximum Shank Diameter • MTC Maximum Tool Clearance

Milling heads are recommended for heavier duty milling applications. They incorporate two preloaded angular contact bearings on the front for improved performance and durabilty in side load applications. Drilling heads are more compact.
'Taperlock' and 'Eltool' Spindles are proprietary spindles designed to minimise the profile of the angle heads.
Please specify the size of Weldon spindle when ordering.